Kipphebel und Kipphebelwellen im Set, SBM, 1,6:1 Originalköpfe

Artikelnummer: HUG-15063
Kategorie: Garage Sale
Hersteller: Hughes Engines

1.470,31 €

inkl. 19% USt. , zzgl. (Standard)

Muss bestellt werden. Ab Bestellung lieferbar in 42 Tagen.
Lieferzeit: 43 - 45 Werktage (Ausland)

Set(s)

Beschreibung

Sonderpreis nur für Restlagerware! Sollte der Bestand vergriffen sein, gilt wieder der normale Preis!

We designed these rockers for Chrysler engines specifically. They are not something that was _close and changed slightly to fit. They were not just _good enough for Dodges_, as others are. We have developed our rockers after years of putting up with other rockers and their various shortcomings. They are made in the USA, exclusively for Hughes Engines. There are several important features that distinguish our rockers from the garden-variety rocker you find from everyone else.

These rockers are CNC machined. This means that once the correct dimensions are determined and programmed in, all parts are identical.
Our rockers have a revised oil system that gives a positive oil flow to the roller and the ball at all angles.
Our rollers and axle shafts are larger (i.e. stronger) and reduce rolling friction
They do not use needle rollers on the shaft. Mopars® have a full pressure oil supply to the rocker and shaft interface area, and do not need the rollers. On the other hand, stud mounted rockers are not positively lubricated with pressurized oil and must have rollers to live. Magnum rockers are not pressure lubricated and will require rollers on the shaft. Yes, just like the Chevy's!
We do not anodize the rockers for a reason. If anodizing material is left in the bore, the wear surface is compromised when in contact with the hardened rocker shaft. Honing out anodized material is a machining operation that would add cost and leaves a finish no better than a straight bored finish.
We tumble finish our rockers which is not as flashy as the _pretty ones_ like the _tuner guys_ on TV. The appearance is more compatible with those you would see on Pro-stock and NASCAR engines. That's good enough for us.
The roller position and rocker design are unique features. The rollers travel in the center of the valve stem tip and the path is narrower than other _will fit_ rockers. Most other rocker arms do not properlyposition the roller on the valve tip.
Each rocker is marked to designate the engine type, for example, 'LA' or 'B', and the ratio of the rocker.
Includes spacers and shims. Properly assembled and shimmed, each pair of rocker will have less than 0.015_ total side clearance. This provides exceptional oil control and a valve train that is much quieter than all other systems.
For those customers requiring severe duty rockers, we can supply these rockers cryogenically treated. This process will increase thestrength and durability of the rockers 2 to 3 times. For additional information about cryogenic treatment refer to our tech article.
Kits come shipped with complete, detailed installation instructions.
Compatible with hydraulic, mechanical, or roller camshafts.
Machined to clear larger diameter valve springs.

A Produktgruppe:	Kipphebel
Motor Familie:	Mopar small block LA
Versandgewicht:	5,20 kg
Artikelgewicht:	5,20 kg
Abmessungen ( Länge × Breite × Höhe ):	51,00 × 23,00 × 8,00 cm